Concrete cutting in Anaheim CA - clean cuts right where you marked them
Need an opening in a slab or a hole for a pipe? We cut it cleanly, on the lines we mark with you.

- Licensed and fully insured.
- Free estimates at your property.
- Replies within 1 business day.
Concrete cutting methods we use
Sawing slabs and walkways
We saw straight lines through driveways, patios and slabs to remove a damaged section, make room for a drain or open a path for new work.
Core drilling round holes
Coring means drilling a clean round hole through a slab or wall, which suits a pipe, a conduit or a drain line coming through the concrete.
What does concrete cutting involve, and when do you need it?
Concrete cutting is sawing, breaking or drilling through concrete to make an opening, and at homes in Anaheim, CA we use it to take out a damaged section, run a line under a patio or bring a pipe through a slab without disturbing more than the job needs.
Most calls start with something specific, a cracked stretch of driveway that has to come out, a drain that needs to cross under a patio or a pipe that has to pass through a slab. The price moves with how much we cut, how deep and how wide, whether it's indoors and what has to be checked first, and the schedule turns mostly on those checks being settled before the saw starts. If the cut is the first step toward new work, we can carry on with concrete driveway building or concrete patio construction once the old section is out, and the estimate I give at your property puts a figure on your own job.
Planning, cutting and cleanup on every concrete cutting job
I look at where the cut goes, how deep and wide it needs to be and what might sit inside the concrete, and that decides the saw, the setup and the checks before we start.
Drawings and records first
We go over any drawings or structural records of the slab with you, because they show what was built into it.
A scan where needed
Where cables or lines could be hidden, we recommend a professional scan of the exact spot before any blade touches the concrete.
Utility lines and cut marks
We settle with you who locates and shuts off any utility lines, then we mark the cut lines together on the concrete.
Cutting and slurry cleanup
We agree beforehand how the slurry, the wet dust the blade leaves, gets collected, then cut on the marks and clean up that way.
Why Anaheim homeowners call Advanced Anaheim Concrete Company
I started this business in 2017 to work on homes people already live in, and that shapes how we cut. We plan around your family and your yard, and we treat the lawn, the walls and the neighbors as carefully as the concrete itself.
I come out to look at the job
I come out myself to look at the cut, measure and talk it through with you, and our crew lead runs the work on site with our crew.
Licensed and fully insured
We're licensed and fully insured, which matters on a cutting job because a blade near pipes, walls and hidden cables is work you want covered before it starts.
Satisfaction guaranteed on every job
That's our promise, and starting is simple, with a call to (657) 347-3764 any day of the week or a note through our estimate form.
What happens when you call us about concrete cutting in Anaheim?
We plan a cutting job around your home, your family and your schedule, and I explain each step plainly before you're asked to decide anything.
or call (657) 347-3764
Call or send the form
Call (657) 347-3764 or send the form, and we'll set a time for me to come out and look at the cut.
I visit and measure
I look at the slab, measure, talk through what you'd like and go over any drawings or records you have of it.
Your estimate and plan
You get the estimate, then we go over the plan, what the city needs and how we'll protect your property, and I walk the finished cut with you.

Get a free estimate for concrete cutting and cleanup at your home
Send where the cut goes, its size, whether it's indoors and any slab records, and we'll reply within one business day to set my visit. The estimate is free, done at your property, with no pressure to book.
Questions about concrete cutting in Anaheim
How much does concrete cutting cost per foot?
Professional concrete cutting across the US usually costs about $3 to $10 per linear foot of cut, so treat that as the going range rather than our price. Your own figure comes from the estimate I give after measuring at your property.
How large a hole can a handheld core drill make?
A handheld core drill is usually limited to openings no larger than 6 inches across. Anything wider calls for more than a handheld drill, so please give us the size of the hole when you call and I'll plan the right setup.
What happens if you cut a post-tension cable in a concrete slab?
Cutting a post-tension cable, a steel cable pulled tight inside some slabs, can damage the structure or release its stored force near the people working. One scanning company's guide advises checking the slab's structural records and scanning the exact work area before cutting, which is the scan we recommend where cables could be hidden.
What is the best way to cut concrete so the cut stays close to plan?
A track-mounted saw usually suits a cut that has to stay close to plan, because many handheld saws don't have a guide that holds a set depth. It's fair to ask any crew which saw they'll use, and I'll tell you which one your job calls for when I measure.
What license does a concrete cutting contractor need in California?
California's contractor licensing board lists concrete sawing, breaking and coring under its D-6 Concrete-Related Services Contractor classification. Before you hire anyone to cut, it's reasonable to ask which license they hold.
How do I cut concrete inside a house without filling it with fumes?
The industry's hand sawing guideline calls for ventilation and air circulation that meet OSHA standards when engine-powered saws are used indoors, and it names electric, hydraulic or pneumatic saws as the other options. Please tell us when the cut is inside, since it changes the setup I plan for the room.
Work that often follows a cut
Concrete driveway building
Once a damaged section is cut out, a new driveway built on a properly packed base gives your car a flat, solid place to park again.
Explore Concrete driveway buildingConcrete patio construction
If a cut opens your yard for a drain or a line, a new patio poured over the finished trench brings the space back into use.
Explore Concrete patio constructionConcrete sidewalk building
When a cracked or lifted stretch of walkway gets cut away, a new sidewalk section gives you an even path to the front door again.
Explore Concrete sidewalk building
Concrete cutting in Anaheim and nearby cities
Where the cut happens decides who you deal with at the city. If the work digs into the public right of way, such as a street, Anaheim Public Works issues the permit after a trench cut fee is paid. For cuts on your own property, the city's Building Division points owners who aren't sure whether they need a Building Permit to its "When Is A Permit Required?" guide, and I don't assume either way. When a job needs a permit, we handle the application with the city and book the inspections, and if we're unsure what the city wants, we ask the Building Division before we start.
Most cutting calls we get here are on driveways and patios at homes people live in, and for walk-behind saws outdoors, a California workplace safety rule lists a saw with a built-in system that keeps water feeding the blade, which is one more reason the slurry gets planned ahead. We work the same way on jobs in Fullerton and Orange and across Orange County and nearby, so please call even if your city isn't listed here.
